Aquarius Koi and Aquatics Limited Seachem Filter Media

Advanced Search

About Us
American Villa Rental
Superior Spas
Credit and Credit Facilities
Contact Us
Location
Delivery
Login
Security

Departments > Tropical Marine Products > Filtration > Filter Media > Seachem Filter Media


	Seachem Matrix Carbon 250ml Ref: SCMC1 Seachem MatrixCarbon is a truly unique activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with its high density of macroporous binding sites. MatrixCarbon has a very low ash content as indicated by its minimal impact on pH. Even when added to distilled water, it does not raise pH above 7.0.While all carbons contain phosphate, regardless of false claims to the contrary, MatrixCarbon™ has the lowest detectable leachable phosphate content of all major carbon brands tested. MatrixCarbon outperforms other high grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of adsorption, and duration of use. DIRECTIONS: 250 mL will easily treat 400 L (100 gallons) for several months. MatrixCarbon™ is very clean and nearly dust free. For best results, MatrixCarbon™ should be placed so as to maximize the flow of water through it. It may be used in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter. Price: £9.95
	Qty:

	Seachem Matrix Carbon 500ml Ref: SCMC2 Seachem MatrixCarbon is a truly unique activated carbon. It is formed as a spherical bead for optimum hydrodynamics, and will not pack. It permits maximum water flow and contact with its high density of macroporous binding sites. MatrixCarbon has a very low ash content as indicated by its minimal impact on pH. Even when added to distilled water, it does not raise pH above 7.0.While all carbons contain phosphate, regardless of false claims to the contrary, MatrixCarbon™ has the lowest detectable leachable phosphate content of all major carbon brands tested. MatrixCarbon outperforms other high grade carbons by at least two-fold when compared for total capacity to remove aquarium organic matter, rate of adsorption, and duration of use. DIRECTIONS: 250 mL will easily treat 400 L (100 gallons) for several months. MatrixCarbon™ is very clean and nearly dust free. For best results, MatrixCarbon™ should be placed so as to maximize the flow of water through it. It may be used in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter. Price: £14.95
	Qty:

	*Seachem denitrate 500ml Ref: SCDN1** Seachem denitrate removes nitrates, nitrites, ammonia, and organics from both fresh and marine water. The high porosity of denitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts. Even when exhausted as an organic adsorbent, denitrate continues to be an excellent support for the biological filter and does not have to be removed. DIRECTIONS: For best results, denitrate should be placed to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix™ or Pond Matrix™. It is best to rinse off dust before use. Once denitrate™ has been in use for several days, nitrate concentrations should start to fall and level off gradually at a concentration of about 4–5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of denitrate™ treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes. Price: £8.95
	Qty:

	*Seachem denitrate 1 litre Ref: SCDN2** Seachem denitrate removes nitrates, nitrites, ammonia, and organics from both fresh and marine water. The high porosity of denitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts. Even when exhausted as an organic adsorbent, denitrate continues to be an excellent support for the biological filter and does not have to be removed. DIRECTIONS: For best results, denitrate should be placed to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix™ or Pond Matrix™. It is best to rinse off dust before use. Once denitrate™ has been in use for several days, nitrate concentrations should start to fall and level off gradually at a concentration of about 4–5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of denitrate™ treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes. Price: £14.45
	Qty:

	*Seachem denitrate 2 litres Ref: SCDN3** Seachem denitrate removes nitrates, nitrites, ammonia, and organics from both fresh and marine water. The high porosity of denitrate supports the proliferation of both aerobic and anaerobic bacteria that further remove these toxic aquarium byproducts. Even when exhausted as an organic adsorbent, denitrate continues to be an excellent support for the biological filter and does not have to be removed. DIRECTIONS: For best results, denitrate should be placed to assure the flow of water through it, such as in a canister filter, chemical filtration module, or box filter. Flow rate should not exceed 200 L (50 gallons) per hour. If higher flow rates are unavoidable, use Matrix™ or Pond Matrix™. It is best to rinse off dust before use. Once denitrate™ has been in use for several days, nitrate concentrations should start to fall and level off gradually at a concentration of about 4–5 mg/L as nitrate. As long as nitrate concentrations remain under control, the product is not exhausted. Each 500 mL of denitrate™ treats about 100-200 L (25-50 gallons), depending on initial nitrate concentration and the current biological load. Enough should be used to remove nitrate at a rate at least as fast as the rate of formation. If very high nitrates are initially present, they should be brought down to less than 20 mg/L with water changes. Price: £26.95
	Qty:

	Seachem Purigen 100ml Bagged Ref: PURIGEN Seachem Purigen is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%. Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigen’s impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use. DIRECTIONS: Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black. Price: £9.95*
	Qty:

	Seachem Purigen 500ml Ref: PURIGEN2 Seachem Purigen is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all others by over 500%. Purigen controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigen’s impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen is designed for both marine and freshwater use. DIRECTIONS: Rinse before use. Use in a fine mesh filter bag. Each 1 L treats up to 4,000 L (1,000 gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black. Price: £33.95*
	Qty:

	Seachem Renew 100ml Bagged Ref: SCR1 Seachem Renew is ideal for use in systems where phosphate released from all activated carbons poses a problem. Renew is also less aggressive than carbon, making it well suited for reefs and planted aquaria. It is also beneficial for use in soft water aquaria where the pH-raising property of many carbons is not an asset. Renew will remove organics and particulates in the sub-micron range; it will also help control ammonia, nitrates, and phosphates DIRECTIONS: Renew should be used in exactly the same manner as activated carbon. Use 250 mL for each 120-160 L (30-40 gallons). Use in a filter bag only. Although Renew is clean, it is advisable to rinse before use. It lasts about the same as carbon (4-6 weeks). Price: £3.40*
	Qty:

	Seachem Renew 500ml Ref: SCR2 Seachem Renew is ideal for use in systems where phosphate released from all activated carbons poses a problem. Renew is also less aggressive than carbon, making it well suited for reefs and planted aquaria. It is also beneficial for use in soft water aquaria where the pH-raising property of many carbons is not an asset. Renew will remove organics and particulates in the sub-micron range; it will also help control ammonia, nitrates, and phosphates DIRECTIONS: Renew should be used in exactly the same manner as activated carbon. Use 250 mL for each 120-160 L (30-40 gallons). Use in a filter bag only. Although Renew is clean, it is advisable to rinse before use. It lasts about the same as carbon (4-6 weeks). Price: £8.95*
	Qty:

	Seachem Phosguard 250ml Ref: SCPG1 Seachem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow. It outperforms all competing products. 500 mL easily treats over 150 gallons. DIRECTIONS: For best results, PhosGuard should be placed so as to maximize the flow of water through it. It may be used in a canister filter, box filter, or any high flow area of a trickle filter. In some situations it may be necessary to use in a filter bag. Use 250 mL (~1 cup) for every 300 L (75 gallons). Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest: Phosphate™ or MultiTest: Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Each 500 mL of PhosGuard treats over 600 L (150 gallons) (i.e. will remove up to 30 mg/L phosphate in 600 L (100 gallons) of water, depending on the initial phosphate/silicate concentrations and the current biological load. Over treating is not recommended. PhosGuard is not an exchange resin, it does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities. Price: £9.95
	Qty:

	Seachem Phosguard 500ml Ref: SCPG2 Seachem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow. It outperforms all competing products. 500 mL easily treats over 150 gallons. DIRECTIONS: For best results, PhosGuard should be placed so as to maximize the flow of water through it. It may be used in a canister filter, box filter, or any high flow area of a trickle filter. In some situations it may be necessary to use in a filter bag. Use 250 mL (~1 cup) for every 300 L (75 gallons). Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest: Phosphate™ or MultiTest: Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Each 500 mL of PhosGuard treats over 600 L (150 gallons) (i.e. will remove up to 30 mg/L phosphate in 600 L (100 gallons) of water, depending on the initial phosphate/silicate concentrations and the current biological load. Over treating is not recommended. PhosGuard is not an exchange resin, it does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities. Price: £14.45
	Qty:

	Seachem Phosguard 2 litres Ref: SCPG3 Seachem PhosGuard rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater. PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow. It outperforms all competing products. 500 mL easily treats over 150 gallons. DIRECTIONS: For best results, PhosGuard should be placed so as to maximize the flow of water through it. It may be used in a canister filter, box filter, or any high flow area of a trickle filter. In some situations it may be necessary to use in a filter bag. Use 250 mL (~1 cup) for every 300 L (75 gallons). Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest: Phosphate™ or MultiTest: Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Each 500 mL of PhosGuard treats over 600 L (150 gallons) (i.e. will remove up to 30 mg/L phosphate in 600 L (100 gallons) of water, depending on the initial phosphate/silicate concentrations and the current biological load. Over treating is not recommended. PhosGuard is not an exchange resin, it does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities. Price: £40.95
	Qty:

	Seachem SeaGel 500ml Ref: SCSG1 Seachem SeaGel is a blend of MatrixCarbon and PhosGuard. MatrixCarbon is an ultracapacity carbon for the removal of organic and color impurities. PhosGuard is a powerful remover of phosphate, silicate, toxic metals, and acids. Both components are bead shaped for optimum water flow characteristics and penetration. The components enhance each other and are ideal for reef and marine use. May also be used in freshwater that is not phosphate buffered. DIRECTIONS: Use 500 mL for each 300-450 L (80-120 gallons). Use in a filter bag. Rinse in freshwater before use. Use caution, since product will fizz and heat on initial wetting. SeaGel will function 3-4 months. Price: £14.95*
	Qty:

	Seachem CupriSorb 250ml Ref: SCCS1 Seachem CupriSorb is a powerful adsorbent of copper and heavy metals. CupriSorb will remove copper more rapidly and efficiently than carbon and is thus ideal for emergency copper removal. It extracts all types of copper from water and, if in continuous use, from the gravel/substrate bed as well. CupriSorb will allow maintenance of invertebrates in copper-treated tanks by removing copper leaching from substrates. DIRECTIONS: Use 500 mL for every 1,200 L (300 gallons) to remove up to 15,000 mg (12 ppm) of copper. For best results, CupriSorb should be placed so as to maximize the flow of water through it. To remove undetectable substrate leaching copper keep CupriSorb™ in use for at least 2 weeks after copper tests report no copper. Use in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter. Exhaustion is indicated by a pronounced discoloration of the beads to a deep blue black color. Use MultiTest: Copper to monitor copper. When exhausted, CupriSorb may be discarded or regenerated. Price: £18.45*
	Qty:

	Seachem CupriSorb 500ml Ref: SCCS2 Seachem CupriSorb is a powerful adsorbent of copper and heavy metals. CupriSorb will remove copper more rapidly and efficiently than carbon and is thus ideal for emergency copper removal. It extracts all types of copper from water and, if in continuous use, from the gravel/substrate bed as well. CupriSorb will allow maintenance of invertebrates in copper-treated tanks by removing copper leaching from substrates. DIRECTIONS: Use 500 mL for every 1,200 L (300 gallons) to remove up to 15,000 mg (12 ppm) of copper. For best results, CupriSorb should be placed so as to maximize the flow of water through it. To remove undetectable substrate leaching copper keep CupriSorb™ in use for at least 2 weeks after copper tests report no copper. Use in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter. Exhaustion is indicated by a pronounced discoloration of the beads to a deep blue black color. Use MultiTest: Copper to monitor copper. When exhausted, CupriSorb may be discarded or regenerated. Price: £35.45*
	Qty:

	Seachem The Bag Ref: SCTB The Seachem Bag is an innovative welded filter bag with a durable non-stitched seam. It has a 180 micron mesh, is resistant to bleach, caustics, and acids, and comes with a convenient resealable locking closure. It is available in a convenient 5" x 10" size. It is ideal for all filtration products and has an exceptionally long life. Sizes: 5" X 10" Unlike stitched seams, welded seams are not subject to degradation from exposure to bleach, caustics, acids, or other harsh environmental exposure likely to take place during regeneration of filter media. Caution should be excercised, however, to avoid overfilling or over-packing as welded seams can be forced to separate by excessive pulling forces Price: £10.50
	Qty:
Departments > Tropical Marine Products > Filtration > Filter Media > Seachem Filter Media

Security l Privacy Policy l Terms and Conditions